MISTING
SYSTEM - ACCESSORIES
|
|
SPRAY
NOZZLES - These are the same high quality nozzles that are
included with our misting systems kits. Produces an ultra fine mist at pressures as low as
15 PSI - 200 PSI. Includes a 200 mesh nozzle filter screen. 1/8"MPT. Full cone spray
pattern. |
|
|
 |
 |
 |
 |
 |
Please
note that the figures given below are approximate and will vary depending on the actual
conditions.
STANDARD NOZZLE - White. Emits 1/2 ounce per minute
@ 45PSI . 20" x 20" spray diameter covers 4 sq. ft.
WIDE ANGLE NOZZLE - Black. Emits 5 ounces per minute
@ 45PSI. 32" x 32" spray diameter covers 7 sq. ft.
LOW FLOW WIDE ANGLE NOZZLE - Red. Emits 1/2 ounce per
minute@ 45PSI. 24"x 24" spray diameter covers 4 sq. ft.
|
| $2.49/ea |
$12.48
/ 6 |
$17.88 / 12 |
 |
 |
|
| |
|
Click
here for more information about
our misting nozzles.
|
| NOZZLE
ASSEMBLIES - Use these
with any of our misting system kits. Two types are available.
Choose the elbow style for use at the end of system lines or the
tee style for everywhere in between. Tees allow water to pass
through to other nozzles on the line while an elbow only allows
water to enter from one side thus terminating the line at that
nozzle. |
|
|
|
TEE STYLE
NOZZLE ASSEMBLY - 1/4" or 3/8"
|
| INCLUDES:
1 Standard red nozzle, 1 nozzle filter screen, 1 tee style hose
fitting, 1 female coupling and 2 stainless steel hose clamps.
|
|
Choose the 1/4" for the *Rainmaker I,
Rainmaker Jr. and our Basic Outdoor Misting System Kit
Choose the 3/8" for the Rainmaker I Expanded Misting System Kit. |
*Rainmaker I's purchased before
June 30,1997 require the 3/8" nozzle assemblies. |
|
ELBOW
STYLE NOZZLE ASSEMBLY - 1/4 or 3/8
|
|
INCLUDES: 1 Standard
red nozzle, 1 nozzle filter screen, 1 elbow style hose fitting,
1 female coupling and 1 stainless steel hose clamp.
|
|
Choose the 1/4" for the *Rainmaker I,
Rainmaker Jr. and our Basic Outdoor Misting System Kit
Choose the 3/8" for the Rainmaker I Expanded Misting System Kit. |
|
*Rainmaker I's
purchased before June 30, 1997 require the 3/8" nozzle
assemblies.
|
|
REPLACEMENT
FILTER SCREENS
|
Change your nozzle filter screens every six months or whenever a reduced flow or odd spray
pattern is noticed. 200 mesh. |
|
|
NOZZLE
EXTENSIONS
|
|
Use when installing a nozzle
assembly into a large terrarium or vivarium with thick walls.
Requires an additional female coupling available below. 10 sizes
to choose from!
|
|
|
